|Home||» Products||» Glory Hydraulic Stackers|
Glory Hydraulic Stackers
Glory Hydraulic Stackers
Rigid Mast Stackers:
Rigid Mast Stackers are light weight machines, ideal for tool handling general stores work, and vehicle loading for loads upto 300 Kgs and 1000 Kgs. They are generally short in height and being light in weight can be easily maneuvered through tight space, and low door frame. They are available for lifting heights of 1200 mm and 1800 mm.
Telescopic Mast Stackers:
These are useful heavy duty stackers, which are ideal for handling pallets and heavy duty components where higher lifts are required but the closed heights be such that the equipment passes easily under door frames beams and arches etc. Here, the inner mast telescopes into the outer mast thereby considerably. They are available for lifting heights of 2000 mm, 2500 mm, 3000 mm, 2500 mm and 4000 mm.
Guide sections are made of reinforced hot rolled steel channels, mounted on rigidly fabricated base frames. Twin heavy duty adjustable, leaf / Roller chains are fitted to provide load stability. Large diameter wheels and castors, running on ball bearing, assist easy movement. The equipment is fitted with a frame type handle for precise location all stackers are designed for loading the into capacity of the equipment at a load center of 500 mm load having a load center of more than 500 mm derate the capacity of the stacker substantially.
The Hydraulic system consists of an oil tank, pump cylinder manifold plate and hydraulic cylinder the oil tank is welded to the manifold plate. The hydraulic pump is a positive displacement. The manifold plate is fitted with a plunger cylinder a release valve assembly and a suction valve with a built in filter. The delivery part of the pump is connected to the hydraulic cylinder through a standard hosepipe. The piston in the hydraulic cylinder is hard chrome plated to protect it from corrosion and rust. Additionally, a wiper seal protects the hydraulic cylinder from the ingress of dust and dirt.
The Operation of the equipment is simple. Here, the hydraulic cylinder is actuated by working the ram pump handle an up-down pumping action. Lowering done by turning the release knob in the anti-clockwise direction, and can be adjusted to very fine limits, to ensure exact positioning of the load.
Electro Hydraulic System:
The motor is energized by a micro switch, through a Contactor actuated by the control valve lever, thus ensuring running of the motor only while lifting. Lowering is done by the same lever, pushed in the opposite side and the stacker comes down of their own weight. A limit switch stops the motor when the fork carriage reaches its full lift. A manual hydraulic pump can be fitted on request along with the electro hydraulic system, for use in case of electrical failure.
Cast iron wheel are mounted on anti friction bearing of following size:
a) Wrapover Stacker:
- 2 Nos. Trial wheels of size 83x75mm
- 2 Nos. Front wheels of size 150/200x50mm.
b) Straddle Stacker:
- 2 Nos. Trial wheels of size 150x50mm
- 2 Nos. Front wheels of size 200 150x50mm
- (Nylon wheels are available on request)
- Over load protection; mechanical and electrical.
- Flow control valve in case of house failure.
- Variable speed for lifting and lowering. (With lever control only).